Enter your query, example: how not cry when slicing onion or how to enter an Free Italian Sex Webcams?

Hot bodies rc cars homepage Videos

Hot Bodies D413 - Build Update 1

So far about an hour into the build, which was a bit unconventional. The D413 has you build the technical parts first including the shocks, diffs and turnbuckles.

User Comments

https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
It's worth noting that when you build the car in the saddle pack configuration, many motors will not fit. I tried a viper, novak, and a reedy and none of them fit behind the steering post. I heard that an Orion will fit but I couldn't see if it did. I finally built it with the shorty.
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
+LindyFD 160 Good info.  I like the shorty config, as I have many shorty batteries and it probably saves a bit iof weight
https://lh4.googleusercontent.com/-iGfVhrK_LFc/AAAAAAAAAAI/AAAAAAAAABI/5OLcJNPLyqI/photo.jpg?sz=64
I read the literature about the shock caps, and how new Aluminum caps were released. My question is with the OEM plastic caps. Why do they have a screw at the top if they are not used to bleed the shocks (building them right now)? Thanks
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
+RockNSteady They were released......And I have purchased the last set on the planet via eBay shipping from the UK.  I also B/O some from Amain,........The Stockers can be built either with the included bladder or emulsion style (just an o ring)
https://lh3.googleusercontent.com/-SF8uTq33FOk/AAAAAAAAAAI/AAAAAAAAAT0/OzU7DbKqhMM/photo.jpg?sz=64
This car is very nice, I drove one and it's just like a mix between a B44 and an Xray (if u have ever driven a xray xb4) It's aggresive and plays with you but is also forgiving, I will be picking up a Lazar ZX6 from kyosho very soon, and will put in the gear diffs when I get it! I can't wait to get a 4wd buggy!
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
 The D413 is in a league of it's own in my opinion.  The B44.X with it's durabilty issues and the Xray with it's plastic gear diff are still a far cry away.   
https://lh6.googleusercontent.com/-NlfiBS0iajk/AAAAAAAAAAI/AAAAAAAAABs/qFY7J309QbA/photo.jpg?sz=64
What are all the required hex sizes for screw drivers for this build???
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
 2.5, 2.0, 1.5 and technically 1.3mm (although I found that my .050 MIP driver fit better)
https://lh4.googleusercontent.com/-XB4tutRNxw8/AAAAAAAAAAI/AAAAAAAAAEE/8GItDfLGLLE/photo.jpg?sz=64
Hey Rich did u put the size on your MIP Thorp hex drivers like that or are they new and that's how they come now? I use those along with other brands also. Next question, how long have u had your channel and how many kits have u built on it? Do u keep all of them or do u sell some? And last do u always buy new electronics or do u swap sometimes if no longer gonna run a certain kit? Thanks man, channel is awesome.
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
Thanks for the great comments JD!  My MIP drivers are a couple of years old and did not include the new "Wrench Wraps" Here's my video explaining it:  MIP Wrench Wraps  I've probably had about 40 different RC's featured at The RCNetwork with about half being "kits"  Right now, I have about 12 in the studio.  As for electronics, I do re-purpose electronics.  They're pretty expensive when you get the good stuff and really last a long time if you keep them working good.
https://lh3.googleusercontent.com/-bJ4ugxHgXJQ/AAAAAAAAAAI/AAAAAAAAACY/CYy9yoWgiHc/photo.jpg?sz=64
Great videos man ! Also love your taste in the parts you chose. No expense spared !
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
+burgsenior Thanks B!
https://lh3.googleusercontent.com/-3_scH40Fj-8/AAAAAAAAAAI/AAAAAAAAACM/M5-W5haPh7g/photo.jpg?sz=64
awsome looking kit. but you think for the cost of the kit. they would give you aluminum shock caps 
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
 Yeah, there was some controversy on the caps.  Right after the realease (Over a year ago) TY started running Aluminum caps.  HB has stated they're coming out with them and still nothing.  They stated they had Pro-Line make a one off set for Ty
https://lh5.googleusercontent.com/-1V8iV5UPe0Q/AAAAAAAAAAI/AAAAAAAAAMw/uqL8Sm0J-zY/photo.jpg?sz=64
Nice kit bro!
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
 Thanks MTC.  It is one of my favorite kits already!

Hot Bodies D413 - Unboxing

The Hot Bodies D413 is part of the revolution of 4wd buggies. It's 1/10th scale size screams 1/8th scale roots and with the engineering of Torrance DeGuzman ...

User Comments

https://lh5.googleusercontent.com/-XYVb0hOyo3s/AAAAAAAAAAI/AAAAAAAABOU/ZLCrs47R18k/photo.jpg?sz=64
this guy sure likes to here him self talk.. But the car is great
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
People always forget that I watch every comment.......
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
wish I watched this before I ordered all the Diff oil and shock oil, the .pdf owners manual said you'd need those and I assumed it didn't come with it haha
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
+Chris Ullman Pre-Owned Autos Sorry.....Typically kits will have diff/shock oil included
https://lh6.googleusercontent.com/-4E3G9S26G_Y/AAAAAAAAAAI/AAAAAAAAAT8/RxZaDxiVFPw/photo.jpg?sz=64
I ordered one and said late January then next day. Early Feb. Is this company hard to get parts. If it's this hard to get kit. If you could let me know rc network
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
+matt cheadle HPI has been having some issues the past couple of years......Originally, it was based in California, but was aquired/partnered with Hobbico in Illinois.  Hobbico has recently taken over most of the CS for HPI and that's where most of the issues are, the transition.  Fortunately, Ty Tessmann runs this car and has been getting a ton of press on his wins, which "should" help the parts/car support.  Your best bet is to order from Tower, as they're directly involved with Hobbico/HPI and would probably have the best amount.  With all that said, the D413 is an amazing buggy and drives better than any 4wd buggy I've had.  Nothing has broke, but it would be nice to have some factory upgrades available.  I have recently purchased the AVID racing chassis, weight system and floating servo mount for it and will be testing that soon.  Stay tuned!
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
Have you picked the electronics yet? And how is the build coming along? Thanks. 
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
 Yep, video should be out next week (I had the ESC/Motor since March!)  I'm running a Tekin RSX/Gen 2 Redline 6.5t, New Orion Super Fast servo and some 90c Orion Shorty's
https://lh6.googleusercontent.com/-AC5AL30oz8w/AAAAAAAAAAI/AAAAAAAAAjA/nN22DUMR9i8/photo.jpg?sz=64
great video, looks like a fun build
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
 Yeah, I've heard great things about the D413!
https://lh3.googleusercontent.com/-3_scH40Fj-8/AAAAAAAAAAI/AAAAAAAAACM/M5-W5haPh7g/photo.jpg?sz=64
Wow rich!!!!! super excited for this build series, Now I some how have to convince my wife to buy this for me or maybe go half way 
https://lh3.googleusercontent.com/-3_scH40Fj-8/AAAAAAAAAAI/AAAAAAAAACM/M5-W5haPh7g/photo.jpg?sz=64
well shoot, I better get my name on a list then 
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
 The issue is not the approval/budget, it's finding one!  I've been on the list since march (I looked it up!)
https://lh4.googleusercontent.com/-G7BMhawjlDM/AAAAAAAAAAI/AAAAAAAAAIE/p9vfBaVXTew/photo.jpg?sz=64
Cool hot bodies bugg, orange aluminum parts are cool, it is XRay's trademmark as well :)
https://lh4.googleusercontent.com/-G7BMhawjlDM/AAAAAAAAAAI/AAAAAAAAAIE/p9vfBaVXTew/photo.jpg?sz=64
But cant wait to see the final build on your buggy
https://lh4.googleusercontent.com/-G7BMhawjlDM/AAAAAAAAAAI/AAAAAAAAAIE/p9vfBaVXTew/photo.jpg?sz=64
Its orange !.. their new lineups. From X12 to Nt1 look pretty cool
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
+SoCal Rc Guy I thought XRay was light blue.....

Hot Bodies Tornado

User Comments

https://gp3.googleusercontent.com/-J1MhkK5HuvA/AAAAAAAAAAI/AAAAAAAAAAA/ticAXmQEtvM/s48-c-k-no/photo.jpg?sz=64
it was like that because i was running rearwheels only most onroads are 4wd but i stripped the front gears so i was stuck in 2wd
https://i1.ytimg.com/i/aqc6kLwH8_sAM9eT62trhg/1.jpg?sz=64
hes got the same shoes as me lol from burtons lol nice car and take those drift tyres of the back end and get touring car tyres
https://gp3.googleusercontent.com/-J1MhkK5HuvA/AAAAAAAAAAI/AAAAAAAAAAA/ticAXmQEtvM/s48-c-k-no/photo.jpg?sz=64
yea it just sucks that hot bodies dosnt make parts for it anymore. where do you get your parts from?
https://gp4.googleusercontent.com/-01qwG0GogUA/AAAAAAAAAAI/AAAAAAAAAAA/yf4O1z1sOLM/s48-c-k-no/photo.jpg?sz=64
kie maybe this car is superfast , but if it has no traction then whats the fucking point,..???
https://i1.ytimg.com/i/G4lKhDkI-WGbUFYO5XOv6w/1.jpg?sz=64
iv got same car its rapid fast when u get touring tarmac wheel trust me!
https://gp3.googleusercontent.com/-J1MhkK5HuvA/AAAAAAAAAAI/AAAAAAAAAAA/ticAXmQEtvM/s48-c-k-no/photo.jpg?sz=64
depends how much you drive it a gallon could last a month or two days
https://i1.ytimg.com/i/G4lKhDkI-WGbUFYO5XOv6w/1.jpg?sz=64
yh it spings like mad i know iv got 1 get some touring tarmac wheels
https://gp3.googleusercontent.com/-J1MhkK5HuvA/AAAAAAAAAAI/AAAAAAAAAAA/ticAXmQEtvM/s48-c-k-no/photo.jpg?sz=64
its an awesome car but onroad isnt for me..so im going to sell it.
https://gp4.googleusercontent.com/-g0uNmvXpwpQ/AAAAAAAAAAI/AAAAAAAAAAA/7xKPkmHrKkw/s48-c-k-no/photo.jpg?sz=64
you can get parts for it just need to check on the hpi web site
https://gp3.googleusercontent.com/-EnEdGlV19x4/AAAAAAAAAAI/AAAAAAAAAAA/3qfnNFU-iA8/s48-c-k-no/photo.jpg?sz=64
seems impossible to drive straight. spins like a tornado.
https://gp3.googleusercontent.com/-J1MhkK5HuvA/AAAAAAAAAAI/AAAAAAAAAAA/ticAXmQEtvM/s48-c-k-no/photo.jpg?sz=64
after bob hastings day i think i will keep it lol
https://i1.ytimg.com/i/G4lKhDkI-WGbUFYO5XOv6w/1.jpg?sz=64
u can get lods of parts 4 em around where i live
https://gp3.googleusercontent.com/-J1MhkK5HuvA/AAAAAAAAAAI/AAAAAAAAAAA/ticAXmQEtvM/s48-c-k-no/photo.jpg?sz=64
rear wheel drive

Hot Bodies D413 - Build Update 2

The Build time has grown to right over 2 hours and what a build. Everything you think you know about other buggies, changes with the D413 build! Now it's time ...

User Comments

https://lh6.googleusercontent.com/-NlfiBS0iajk/AAAAAAAAAAI/AAAAAAAAABs/qFY7J309QbA/photo.jpg?sz=64
Are the front shocks the 88mm or 100mm
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
+Jonathan Postell II That's it for upgrades...It is getting a new body and electronics but nothing earth shaking. That video should be out in a week or so. Then gonna capture some more running video.
https://lh6.googleusercontent.com/-NlfiBS0iajk/AAAAAAAAAAI/AAAAAAAAABs/qFY7J309QbA/photo.jpg?sz=64
+The RCNetwork Are you making anymore upgrade videos beyond the one with the exotec wing mount brackets
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
+Jonathan Postell II Good deal
https://lh6.googleusercontent.com/-NlfiBS0iajk/AAAAAAAAAAI/AAAAAAAAABs/qFY7J309QbA/photo.jpg?sz=64
+The RCNetwork thnx I called them n they said 88mm front & 100mm rear
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
+Jonathan Postell II Not sure.....They're the stock shocks and are quite long for a 1/10th scale
https://lh6.googleusercontent.com/-BEmHdmu5Nx0/AAAAAAAAAAI/AAAAAAAAACg/mvopLBKGLWU/photo.jpg?sz=64
Just got mine delivered today on the strength of this review.....Great vid.
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
 Nice!  You'll love the D413.  Great little buggy and super easy to drive and win!
https://lh4.googleusercontent.com/-XB4tutRNxw8/AAAAAAAAAAI/AAAAAAAAAEE/8GItDfLGLLE/photo.jpg?sz=64
Did the orange aluminum shims come with the kit?
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
 Yep, Hot Bodies included all of the orange items.
https://lh3.googleusercontent.com/-3_scH40Fj-8/AAAAAAAAAAI/AAAAAAAAACM/M5-W5haPh7g/photo.jpg?sz=64
Awesome update rich. Only half way through the build and it looks beastly 
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
 Yeah, it's really coming along quickly
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
What were those empty holes in the battery tray used for (where the battery sits)?
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
 When running a Shorty Pack, you have 2 extra holes to move the pack toward the rear for more traction and less steering.  I have it set up right now as the manual suggested.  The other three are for the Saddle pack configuration (Which is included in the kit)
https://lh5.googleusercontent.com/-MvcF3s1cja4/AAAAAAAAAAI/AAAAAAAAABI/di-aHoC6rCk/photo.jpg?sz=64
I really like this buggy. Great vid. Thanks
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
+tommy23490 Thanks for watching, Tommy!

Hot Bodies CR8

The new Hot Bodies CR8 proto first look at Motorama 2011 - RC Car Action - video.

User Comments

https://gp6.googleusercontent.com/-D2T3LkkQxaY/AAAAAAAAAAI/AAAAAAAAAAA/SauBeQcLeD4/s48-c-k-no/photo.jpg?sz=64
@Thatonepersonz With copied I mean that - after Losi started to narrow the chassis - Team Durango really brought the next step to "ultra copact" the car. I think the D8 was great and the CR8 will be good, too, but $300? Over here the D8 was at €450 ($590) and spares were close to Kyosho pricing. However ... I'm excited about the all new Xray platform 2012.
https://gp5.googleusercontent.com/-l1FNjzF8yZ8/AAAAAAAAAAI/AAAAAAAAAAA/hDW4cZ6-rBQ/s48-c-k-no/photo.jpg?sz=64
@StefanR0 NEVER REACHED?!?!? I dont even like hot boddies but the way there stuff is layed out and designed is way different okay, Centered stuff is beter and its going to be the new thing.... If durango was "never reached" why arnt they winning the worlds and a $300 car is?!! :)
https://gp6.googleusercontent.com/-D2T3LkkQxaY/AAAAAAAAAAI/AAAAAAAAAAA/SauBeQcLeD4/s48-c-k-no/photo.jpg?sz=64
He can't imagine anything better? He should try a Team Durango ... often "copied", never reached. :-) However, a nice chassis idea. But lightening the chassis isn't so good as CG will rise. But they know what they are doing! Nice car but ugly body.

MINIZILLA by HOTBODIES - 2yr Old Drives His RC Truck

My 2yr old son driving his R/C truck at our Church parking lot. Minizilla Mods: Intellect 1400Mah Nimh, custom shimmed slipper assembly, aluminum TVP ...

User Comments

https://i1.ytimg.com/i/w7KbG3FQMatF7XD8xNdK8g/1.jpg?sz=64
dude you should have him on some nitro by the time hes like 4. Haha but i wouldn't do that cause im an electric guy, only 14 though and i have bought 3 rc veichles this year. YES THREE! a wheely king mini monster baja and rc18r, and im gonna make me my own truck like a clod but small. thats all im gonna tell ya. tell this little guy to keep up the good work. By the way what age did he start.
https://gp4.googleusercontent.com/-PAT1Cv1dCWs/AAAAAAAAAAI/AAAAAAAAAAA/APG0obx42cw/s48-c-k-no/photo.jpg?sz=64
No I never tought it to him. I have seen another 3 year old hold it this way. I think the distance betweeen the grip & the trigger is shorter that way. he still has a hard time hitting reverse. He hakes heis hand off the wheel & moves the trigger to reverse. Weird, but it works for him. BTW he is 3 now and a lot better driver now.
https://gp4.googleusercontent.com/-PAT1Cv1dCWs/AAAAAAAAAAI/AAAAAAAAAAA/APG0obx42cw/s48-c-k-no/photo.jpg?sz=64
I got him a Traxxas Stampede VXL...65MPH...is that too fast 4 a three yr old? To tone it down a bit, it will be geared down with a 16T pinion. The VXL will be running one of the new Maxamps 12,000mah 2S lipos. Hoping to get at least 40 minutes to an hour run time. Thanks ~Combat Chuck
https://i1.ytimg.com/i/w7KbG3FQMatF7XD8xNdK8g/1.jpg?sz=64
haha wish my dad got me on our rc planes at this age. haha i dont think that would work out. And what trucks are you thinking about getting him. Im looking for a cheap 1/10 electric kit ractruck. Maybe an associated L4. Can you tell us what truck you get him when you do.
https://gp4.googleusercontent.com/-PAT1Cv1dCWs/AAAAAAAAAAI/AAAAAAAAAAA/APG0obx42cw/s48-c-k-no/photo.jpg?sz=64
Sorry, dude, you're mistaken. It's real. He's an R/C freak!!! See my other 3 videos of him driving. One driving a Savage & the other of him driving his little truck at the race track. Enjoy!!!
https://gp4.googleusercontent.com/-PAT1Cv1dCWs/AAAAAAAAAAI/AAAAAAAAAAA/APG0obx42cw/s48-c-k-no/photo.jpg?sz=64
2 when he started. This video was one of the first times he drove his Minizilla. He's 3 now. Yes he drives nitro too checkout my other video of him driving my Savage. later, ~Combat Chuck
https://i1.ytimg.com/i/w7KbG3FQMatF7XD8xNdK8g/1.jpg?sz=64
haha nice. Think im getting an m03 here, and gonna start on road her town in my town. No one does on road and i like on road quite a bit. What upgrades you got in your stuff
https://gp3.googleusercontent.com/-CJOtG5LEncE/AAAAAAAAAAI/AAAAAAAAAAA/AABYKAc4j7E/s48-c-k-no/photo.jpg?sz=64
I love your video, your son is a great driver and seems very focused! I'm about to buy my 3 yr old son his first "real" truck, any suggestions? Great song too, what is that?
https://gp4.googleusercontent.com/-QQN4IEiPuIQ/AAAAAAAAAAI/AAAAAAAAAAA/ff25HwUstCs/s48-c-k-no/photo.jpg?sz=64
cool.i got a revo 2.5 with a rb tm 523 a full through carbon fibre chassie and a revo 3.3/ ftx fury/ tt01 and a minizilla and im only 13.
https://i1.ytimg.com/i/w7KbG3FQMatF7XD8xNdK8g/1.jpg?sz=64
Nice! You'll get him going so fast he'll show up some on road racers. that would be one heck of a truck with brushless lipo.
https://i1.ytimg.com/i/w7KbG3FQMatF7XD8xNdK8g/1.jpg?sz=64
whooee, did anyone notice when he hit the ramp the truck was on its back wheels. he just inveted a new way to do a wheelie.
https://gp3.googleusercontent.com/-0ZCBlqVd6sY/AAAAAAAAAAI/AAAAAAAAAAA/nIOTUSmMxxM/s48-c-k-no/photo.jpg?sz=64
nice collection... im 12 (almost 13) and in the last year ive baught 4... a Savage X, a B44, a LSP2, and a T4 :)
https://i1.ytimg.com/i/_Ks8wu-Qz51i4CpRdppJPA/1.jpg?sz=64
ill be watching this kid's name.. someday he will be as famous as atsushi hara or andy moore.. Ü

Hot Bodies Hara D8 and D8T Review

This is part 1 of the review series. The rest should follow shortly. This is my 1st official review video so take it easy on me, lol. Really like the truck though.

User Comments

https://gp6.googleusercontent.com/-IxNPrjvdtJI/AAAAAAAAAAI/AAAAAAAAAAA/vAmnVD7HKN8/s48-c-k-no/photo.jpg?sz=64
Hey Ronnie, has anything broken on it yet? I found out it's real easy to pop an arm if you nose-dive like me: hard and often. ;-) You obviously a very good driver, but it's a known issue with this kit. I'll message you the link, or just search 'How to make your D8T Nose-dive Friendly' on my channel.
https://gp6.googleusercontent.com/-IxNPrjvdtJI/AAAAAAAAAAI/AAAAAAAAAAA/vAmnVD7HKN8/s48-c-k-no/photo.jpg?sz=64
Hey man, check out our channel....I run a D8T as well. Let's keep this club tight so we can support each other! I wish I new about 2012 Proline body (I used the 'tall' 8-T posts instead of drilling my tower - but that is not a good mod). I just painted/trimmed a new stock body. UGH!
https://gp3.googleusercontent.com/-cR_z0ZvoM1c/AAAAAAAAAAI/AAAAAAAAAAA/S78HTkjoe-Y/s48-c-k-no/photo.jpg?sz=64
I just ran the D8 Hara for my 2nd time today with the new setup changes on it and that buggy feels great now. How do you like the Intech?
https://gp3.googleusercontent.com/-cR_z0ZvoM1c/AAAAAAAAAAI/AAAAAAAAAAA/S78HTkjoe-Y/s48-c-k-no/photo.jpg?sz=64
Right on bro, ill check it out. Thanks for the compliment but I really don't think that i drive too good. I need a lot more practice :)
https://gp3.googleusercontent.com/-DRab5Q45HxM/AAAAAAAAAAI/AAAAAAAAAAA/dXlMCTMj1V0/s48-c-k-no/photo.jpg?sz=64
I just got it. Check out my build vids. Lots of carbon fiber and aluminum for a 450 dollar car. It is feels more lighter than the d8.
https://gp3.googleusercontent.com/-cR_z0ZvoM1c/AAAAAAAAAAI/AAAAAAAAAAA/S78HTkjoe-Y/s48-c-k-no/photo.jpg?sz=64
Right on, I will check out your channel. I am also going to post a vid about the fitment of my proline bull dog body.
https://gp3.googleusercontent.com/-DRab5Q45HxM/AAAAAAAAAAI/AAAAAAAAAAA/dXlMCTMj1V0/s48-c-k-no/photo.jpg?sz=64
I ran for hot bodies and I really like the d8. I just go rid of it because I signed on to vp pro and run for intech.
https://gp3.googleusercontent.com/-cR_z0ZvoM1c/AAAAAAAAAAI/AAAAAAAAAAA/S78HTkjoe-Y/s48-c-k-no/photo.jpg?sz=64
With the new Proline 2012 D8T body it will fit without the mounts. I just cut the body out and it fit perfectly.
https://gp6.googleusercontent.com/-IxNPrjvdtJI/AAAAAAAAAAI/AAAAAAAAAAA/vAmnVD7HKN8/s48-c-k-no/photo.jpg?sz=64
Look forward to that vid! I'm putting together a track vid of mine I'll post soon.
https://gp3.googleusercontent.com/-cR_z0ZvoM1c/AAAAAAAAAAI/AAAAAAAAAAA/S78HTkjoe-Y/s48-c-k-no/photo.jpg?sz=64
RIght on, sounds good. I will check out your build vids.
https://gp3.googleusercontent.com/-DRab5Q45HxM/AAAAAAAAAAI/AAAAAAAAAAA/dXlMCTMj1V0/s48-c-k-no/photo.jpg?sz=64
Oh are you talking about the d8t? Then yeah you do.
https://gp3.googleusercontent.com/-DRab5Q45HxM/AAAAAAAAAAI/AAAAAAAAAAA/dXlMCTMj1V0/s48-c-k-no/photo.jpg?sz=64
I didnt when I had mine.

Hot Bodies D413 - Build Update 4

Several hours have been invested in this build and it has really come to a close quickly getting ready for wheels/tires and a body! The Hot Bodies D413 is part of ...

User Comments

https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
nice... love for the tekin gear-with hotwire and a pc you can really fine tune your setup. ran the rsx and 6.5 in my durango dex410 - perfect for a "wheeler" nice choice!
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
+hsp-sandiego You can't go wrong with Tekin!
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
This was very helpful. How did you get the Losi 22 arm to work? The threads are different than the ball given in the kit. We're you able to purchase a ball that fit with std thread ? If so what is the make? Thanks again. 
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
+The RCNetwork Thanks, How about the Losi 22 Servo Arm. the threads ared standard. Is there a ball stud that will fit the HB ball cup with standard thread that will fit the Losi servo arm? Thanks again!!!
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
+Bill Laster If you're referring to the Lunsford turnbuckles, I used the stock cups on the Lunsford Ti Turnbuckles
https://lh4.googleusercontent.com/-iGfVhrK_LFc/AAAAAAAAAAI/AAAAAAAAABI/5OLcJNPLyqI/photo.jpg?sz=64
So eliminating the servo saver with end points set correctly has no negative effect? I want to place just a regular horn on it. Is that okay?
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
+RockNSteady in a sense, yes.  However, a good harsh landing with a low torque servo could have ill effect.  I think in the D413, you can run a direct servo horn with a 180+ oz/in torque servo with no problem
https://lh5.googleusercontent.com/-DUB99ybYWqo/AAAAAAAAAAI/AAAAAAAAACo/AiboWs5Evn8/photo.jpg?sz=64
Washers size for the slope 
https://lh5.googleusercontent.com/-DUB99ybYWqo/AAAAAAAAAAI/AAAAAAAAACo/AiboWs5Evn8/photo.jpg?sz=64
Cool thanks
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
 I ended up buying a ton of washers from a local hardware store and ended up finding the exact size to help not bottom out the areas on the steering rack.  I also used them through out the buggy where ever slope was found.  Sorry for not the best answer, but I think I spent maybe $6 in washers and it was priceless!  The key was the thickness and the inside diameter of the washer
https://lh3.googleusercontent.com/-3_scH40Fj-8/AAAAAAAAAAI/AAAAAAAAACM/M5-W5haPh7g/photo.jpg?sz=64
You have that D413 just screaming rich. Can't wait to see it finished 
https://lh3.googleusercontent.com/-3_scH40Fj-8/AAAAAAAAAAI/AAAAAAAAACM/M5-W5haPh7g/photo.jpg?sz=64
Welcome rich, it's a pleasure as always watching your video's 
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
 Thanks as always, Johnny!
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
this is off topic from the vid, but i have a sprint 2 and was looking for your opinion on gearing. would like to see speeds around 60mph. Any advice? everything is stock except the sidewinder 3 combo.
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
Depending on the kv of your sidewinder system (4600 and 5700kv will be fine), run a 3s Lipo and you'll get right close to 60mph with stock gearing.  Watch your ride height, as the higher up the body, you'll catch air under and it will go airborne!  Kepp an eye on your temps as well
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
Hello, flip the cross "X" brace for your RSX so the dimple side is down. 
https://lh3.googleusercontent.com/-XdUIqdMkCWA/AAAAAAAAAAI/AAAAAAAAAAA/4252rscbv5M/photo.jpg?sz=64
Not a problem! You're not the first, nor will you be the last! Great video's and reviews! We really enjoy them
https://lh6.googleusercontent.com/-CxrKUkIz9ZM/AAAAAAAAAAI/AAAAAAAACC4/dCVvdgDRkug/photo.jpg?sz=64
 Thanks Ryan, I will check that out
Sign up for free to join this conversation on fsaved.com.
Already have an account? Sign in to comment