Enter your query, example: how not cry when slicing onion or how to enter an Free Italian Sex Webcams?
Nissan cube grill Videos
- 1. ATI Grill Install on 09 Nissan Cube
- 2. Nissan Cube walkaround Baron Nissan NY
- 3. The Average Guys Garage: How to change the front brakes on a Nissan Titan
ATI Grill Install on 09 Nissan Cube
A small review and installation of the ATI Grill on a 2009 Nissan Cube. The Grill is an excellent option for people who want an affordable stylish upgrade to one ...
Nissan Cube walkaround Baron Nissan NY
Nissan Cube walkaround Baron Nissan NY Asymmetry Is The New Black Design From its unique wraparound rear window to its photo frame rounded side ...
The Average Guys Garage: How to change the front brakes on a Nissan Titan
Welcome to The Average Guys Garage. In this video I will be showing you how to change the front brakes on a 2005 Nissan Titan. I hope you find this video ...
User Comments
Arcqueid
commented
on 30 Sep 2013
Little tip to save your anti-lock break module. Clamp the break lines with
smooth vice-grips or use the break line clamps that you are suppose to use.
Then open the nipple on the caliper tell the fluid comes out. Then collapse
the pistons. Then close the nipple. This keeps air out of the break lines
and also saves you from potentially damaging your anti-lock break module.
The abs does not always get damaged ,but it does happen a lot.
Chris Melochick
commented
on 21 Apr 2013
Overall, great video. I did have a question for you, I was having a
"clicking" or "ticking" noise coming from my front brakes in my Titan. I
Took the brakes apart, cleaned them and re lubed them, had the rotors
machined, and put it all back together. Now there is this strong pulsing in
the brake pedal and slight vibration in the steering wheel. Other than
assuming the machine shop destroyed my rotors, do you have any other ideas?
Josh Arnold
commented
on 27 Dec 2014
Thank you so much I changed just the pads, but cleaned and had some one
take a look at the rotors. With buying pads, a c-clamp and the medium
loctite, I saved $250 doing it myself! I searched everywhere for palace to
change my brakes and the cheapest place was $383. Now I can buy some new
jeans to replace the ones I just mucked up, lol!
Jason Douglas
commented
on 11 Oct 2013
No not if they are still within the minimum thickness tolerance for the
vehicle. It's also not necessary to bleed the brakes unless you are
removing brake lines, replacing calipers etc or if the vehicle is older say
than 5 years old or something.
Jdmorris143
commented
on 28 Feb 2013
Good info. I suggest cleaning the pistons before depressing them. Also, a
way to make it easier is to bleed the brakes while pushing in the pistons.
Then add fresh brake fluid. Great video either way. Keep them coming.
Marvin Craig
commented
on 12 Jul 2013
Thanks for this I think its time for me to replace my front rotors on my
'05 Titan. Getting some steering wheel shimmy when applying the brakes at
higher speeds.
Louis Boestfleisch
commented
on 26 Jun 2013
Do you suggest putting high temp grease on any parts of the braking system
front or back? If so where would you put it?
John Healy
commented
on 24 Sep 2015
Nissan recommends changing the bolts on the caliper bracket every time you
take the bracket off. Just a little tip.
MrStar
commented
on 05 Sep 2013
Nice last note about pumping the brakes because you will not have any
brakes until they're pumped and hard again.
mike simpson
commented
on 15 Apr 2015
Perfect DIY video. Clear concise and thorough. Thank you and keep it up.
SuperrichBearHD
commented
on 19 Sep 2013
How come you did not put any dielectric grease on the pads and pistons?
tylerinterlandi
commented
on 03 Mar 2015
Will you do a video on new rotor and brake pad break in procedure?
Sign up for free
to join this conversation on fsaved.com.
Already have an account? Sign in to comment
Already have an account? Sign in to comment