Laptop wd40 Videos

brake cleaner I mean

+Chris Gaming lol i think it was the website that accidently made that typo.

+MiezerGaming 360 noscope

Blaze it

omg yhat was rude, but it was so funny i almost shit my pants

YO EVERYONE! GO HERE--> https://www.facebook.com/1517160868604660/photos/a.1517166945270719.1073741828.1517160868604660/1518674771786603/?type=3&pidid=d105e69d-255d-4a06-a139-6c63af2af7c7 FOR THE Sky Force CHEAT THAT WORKS! IM USING IT :) 5 Simple Life Hacks Part 4

hahahahahhaa bravo

+Jahir Banuelos lezz check out next life hack, pretty amazin huh?

Wtf lmao

omg

omfg im dead, black cock

+Stacey Gates xfff fcfg

ha-ha

+AncucGaming Sweg

+Tacoss Locoss if you put captions on it says " Life sucks but check it out first black cock begun user" its funny

+User 901 (IPunch) life sucks lol

lol first black cock begun a user

Lmao dead

+AncucGaming And then after that, 'who dey'

I don't get it

I agree with him at 0:07. TURN on the captions.

oh. my. god

Oh my ...

+muh gains NO.

now seeing it's your theme song...

+DUSTERDUDE238 It has oder-less mineral spirits in it which is, if my memory is correct, highly refined kerosene. Also mineral spirits is the main ingredient along with mineral oil, not fish oil.

+DUSTERDUDE238 I found out that WD40's main ingredient is fish oil. No wonder it smells. You can use rubbing alcohol on all the demonstrations in the video. Works great. I shine my tea kettle & faucets with it. Great on chrome.

+Delcimar Bezerra kkkkkkkkkkkkkkkkkkkkkk NEH

+Lucas Lune kkkkkkkkkkkkkkkkkkkk PSE man

voce é um leigo cr , vou me formar amanha pelo amor de deus

eu lavei minha placa com água..não deu nada errado..só acho tem muita frescura nesse video ..GPU: GTX 970 Gigabyte G1 Gaming CPU: Intel Core I7-4790 3.6GHz Water Cooler: Cooler Master Seidon 120V RAM: 16GB Kingston HyperX Fury 1600MHz Placa Mãe: Gigabyte GA B85M D3PH Fonte: EVGA 600W HD: Seagate Hybrid 1TB + 8GB SSD Sata III 3.5

+VIVIANNE SIGUEIRA mds estudo Hardware para ver esser merdas fazer isso

+VIVIANNE SIGUEIRA KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK

+VIVIANNE SIGUEIRA kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk

+William Garcia tem cara que lava até com água comum msm...

+VIVIANNE SIGUEIRA tem video de um cara lavando com escovão, parece que ta esfregando o chao da casa suhsuhsu

+VIVIANNE SIGUEIRA essa foi foda msm kkkkkkkkkkkkkkkkkkkkkkkkkkk

+Fran Martinss Lava com detergente mesmo , amenina ta certa, é tanta sujeira nas redes sociais e internet em geral precisa de uma lavagem geral kkkkkkkkkkkkkkkkkkkkkkkk

+Fran Martinss Por favor! água ajuda a oxidar os metais! Detergente tem uma parte polar e outra apolar, o que é bom para a limpeza, mas não quer dizer que água seja bom! Água só em ultimo caso! Não sabe disso e quer mandar os outros estudar?

+Fran Martinss Uma coisa e limpar outra e danificar né? ele ja falou em videos anteriores que pode lavar com detergente mais diminui a vida util do computador então e melhor usar o álcool

Sim, procure por esse da Clone, é bom. Eu ainda fiz um mod com uma fonte de celular. Soldei nas molas das pilhas. Claro, com o a tensão igual o uso das 4 pilhas. Ficou ótimo. Agora só plugar na minha bancada e usar. Gastava muita pilha.

+Artur Pitanga Obrigado, vou procurar um, preciso lavar minha placa mãe.

Loja Física, em 2004, 2005 como disse. MINI ASPIRADOR DE PÓ CLONE.

+Artur Pitanga Você comprou via internet ou loja física?

+Alami Renamique Eu tenho. É bem das antigas. Lá em torno de 2004, 2005.

+fishkeeper888 It will on some, but it depends on what type of plastic it is. Some plastics are painted and it won't work on them.If possible you should try it out on an inconspicuous area as it might not work.

+ArmoProductions It's unlikely it will work unless it is acrylic (very unlikely)

+Brett Stafford You are welcome ;-)

Thank You

+Brett Stafford I used Autosol, but silver polish is recommended for the best finish.Thanks for the comment

+Phil Long Thanks for the comment ;-)

+colin mitchell You are welcome, Thanks for the comments ;-)

very good to know, thank you.

+colin mitchell It will if they are made from Acrylic, but won't on some other plastics.

+marcelo78 Not sure what you mean?The polish is normally wiped away during the polishing process.

+100roberthenry You are welcomeThanks for the comment

+David Goodwin No, it will only work on Acrylic and some plastics, fibreglass is normally painted, so I don't think this will work on that. You might have a chance with the windshield but I don't think they use acrylic, but you could try it in an inconspicuous area.

Revisa la memoria ram, sacala y limpiarla bien con un borrador y una brocha, revisa si conectastes bien el conector de video. también puede ser eso. revisa y me avisas.

Fue un gusto haberte ayudado. Saludos!

+JUNTOS GANANDO DINERO ya gracias hice lo del comentario de abajo

+JORGE A Sandoval A mi me paso igual q hizo gracias

Puede ser la memoria ram, quitaselo y limpiarla bien con un borrador. Inténtalo y me avisas.

hola que tal, en estos casos es muy difícil dar una solución especifica, me ha pasado algunas veces con otras maquinas del mismo modelo, prueba haciendo todo de nuevo, a veces se te olvida conectar algo, si le pusiste un centavo quitaselo y prueba o ubicarlo bien, también prueba limpiando la memoria ram y ubicándose bien, si ya no te sale con la memoria desarmada y vuelve a hacerle todo. Me avisas saludos

Hmmm ya se por donde va la cosa. Si anteriormente no has formateado tu computador el problema puede ser porque tu disco duro sea de formato dinámico. Y para formatear posiblemente tengas que pasarlo al formato básico. En YouTube hay muchos videos de como hacerlo pero va a necesitar otro computador de ayuda. Después de convertirlo prueba de nuevo formatearlo con el instalador. Ahora que si ya la has formateado con anterioridad y no te había dado este problema anteriormente entonces puede que el formato del disco este corrupto. En estos casos lo mejor es formatearlo ayudándote igual con otro computador con el programa hdd low leves format y hacerle un formateo lento. Y de ahí probar suerte de nuevo formateando con el instalador. Una de las dos opciones te tiene que servir si aun así no te coje ahí sinceramente no sabría que sería y abría que revisar con detenimiento. Saludos.

si aparece el disco duro pero me marca error y aparte que esta bloqueada o nose

Amm entonces si te esta cojiendo el disco duro. Ese disco duro del portatil es el disco duro. Bueno aquí si ya esta mas complicado la cosa porque pueden ser algunas cosas. Lo más frecuente es que el instalador de Windows este corrupto y con más razón si usas CDs lo mejor es montar la iso del instalador en una memoria usb. Haz eso. Bootea con una usb e intenta. Sino busca en YouTube que hay soluciones para cuando el instalador de Windows no reconoce el disco duro.

la estoy encendiendo y me aparece menu de opcion de arranque = Unidad interna de CD/DVD ROM Disco duro del portatil

Si es el disco duro que esta dañado pues la solución es comprarse uno nuevo no hay más solución. Pero en todo caso descarta que también sea otro problema. Cuando entras al boot menú con F9 mira si te aparece el disco duro. Si no te aparece ahí si en definitiva es el disco duro. Otra de las cosas que se te pudo haber dañado es el conector quw va de la placa madre al disco duro pero eso es casi imposible a menos que hayas desarmado el portátil y hayas estropeado el cable pero no creo. Así que ve con F9 en el arranque a ver si te aparece el disco duro. Si no te aparece ahí si es por gusto comprate uno nuevo o si tienes por ahí un disco duro o de un amigo que te preste has la prueba. Saludos.

y podria ver alguna solucion si es que esta dañado ? o el poder hacer que lo reconosca ?

Hmm prueba usando otro disco duro para descartar que se haya dañado el disco duro y ya no sea reconocible.

+Steeven Valdez lo que pasa es que prende pero me dice que no encuentra el disco duro y que le instale un SO pero no hay en donde instalarlo

Pero tu computador si arranca el sistema operativo?? si ese es el caso posiblemente tengas que hacer una reinstalacion de drivers y en el peor de los casos volver a formatear. Dame más detalles de tu problema .

+Catherine 1018 Mantap :P

+Catherine 1018 tapi pas bersihin kuku make pasta gigi MANATAP Berkilau

+triandrianni lestari nah itu rahasianya :D

Anak Dikidi dooong :p

Ya masa bercanda mulu tiap hari -Ikram

wah bener tuh bisa jadi tambahan, tapi masa Deandanya disamain sama lampu mobil :(

+nmt3fReally "my blow dryer is made of plastic"

+Read Adams My blow dryer is made from plastic has two settings and is made for human scalp so  I don't see a problem if you are careful.

+Neil Morris Yea but you wouldnt want to use a blow dryer on something plastic because it would melt and deform it

+SuperSuperLeader wow your so smart to think of that, thank you.

+Mike H. you can wash it away

+bonnie bianco Extra virgin olive oil works good too

+GODOFBEATS whats your point?

Awesome Video, I've run into the same problem with numerous remotes. My observation is there is some kind of oily residue that builds up between the rubber membrane and the circuit board. WD40 is mostly solvent and obviously removes this oil. Another option is alcohol and this seems to work well too. Keep up the great videos and VERY much appreciate your contribution to others and my knowledge. You are #1 in my books !!

I used WD40 on volume controls then I use tri-flow in a precision applicator pen. I did all of my scratchy analog volume controls this way and they are still working great. My laptop had a scratchy volume control when I got it and I did it with tri-flow and it's been working great since, no static or scratchyness. And this should also work for a hand held electronic game that uses these same carbon contacts?

Well, I tried 90% isopropal alcohol first just because it made me nervous using wd40 and it really did not help at all, BUT after using the wd40 it is 100% better. And this remote was terrible! It is our digital TV remote with lots of buttons and heavy use by my kids and only about 1/2 working most of the time. Now they all work. Thanks Rick! Tom B.

I have a "Fred G. Sanford drawer" (like his eyeglasses drawer) that I've aptly named "the land of misfit remotes", and yes, I did try denatured ETOH with little success; what the heck, their only good for kindling now, may as well give WD-40 the old college try! Alas, no laser detector, I'll use a red filter and mirror....

Wow Rick, you were going it a bit with the old service-mans aftershave lotion there (WD-40) there but it looks like it’s done the job once more. I wonder how may remotes and/or TV sets have been junked just for the sake of a quick spray of WD-40 liquid band aid. All the very best... Andy.

I way over did this one on purpose. Try using a little WD-40 with Q-Tips, that is the way I use WD-40. My ten year radio volume control experiment is still working, I use the radio everyday. It is now over fifteen years, and counting. It is worth a try before you through it away.

Don't use WD40 it will wilt your silicon button platform, we repair them dish washing liquid and water, and it works perfect, get a hair dryer just to make sure you have no moisture left. also I find a toothbrush is better then paper towel, hope I helped you have a good day..

Good video! I recall that you used WD40 in at least one other video. I once had a scolding from an old typewriter repair guy when he asked if I used WD40 on my Royal Electric. I had it in his shop for repair. He told me to never use it on a typewriter. He knew the clues.

LOL. I don't see how! Of course I purposely way over did it. And by the way the remote is still working. Also my control test transistor radio, that was the original experiment over 20 years ago, is also still working. I use it almost every day.

I over did it on purpose because using WD-40 is so very dangerous. It's no wonder the world is so missed up, few people do their own thinking anymore. It's easier to let some stranger do your thinking. The Sun is getting harmer....Dah!

I way over did this one on purpose. Try using a little WD-40 with Q-Tips, that is the way I use WD-40. My ten year radio volume control experiment is still working, I use the radio everyday. It is now over fifteen years, and counting.

Good demonstration. I did think you were using a bit too much WD, so I agree, less would be better. I will keep this in mind for the next time I have a problem with electronic devices, thanks.

that is very interesting, I love your videos! I have done this a few times before. works like a champ, and those transistor radios I got today, I got both working fine.

Rick, Too much or too little WD-40...one can't argue with success. Good vid. At some point in the future I may have use of that repair method. Thanks. Regards, John

I hate it when you need to use a remote for something and can't find it! I really don't know why they can't include those buttons on the thing itself as-well.

For years I have been using isopropyl acohol to clean and maintain my remotes. I can flood the contacts if necessary, yet not worry about the after-effects.

Spraying was to much, use just a little WD-40 on a Q-Tip to clean the contacts. That should work better. Thanks junglejammer1

Spraying was to much, use just a little WD-40 on a Q-Tip to clean the contacts. That should work better. Thanks 2010DeanoRiordan

I do the same thing for videogame controllers, but i use contact cleaner instead of wd40 (dries quick and is not oily)

I've used electronics cleaner spray on an old Sony remote and that did the trick! It's fast drying too

Thanks for sharing this tip. I have a few remotes that are acting up. I'm gonna try this for sure.

To much WD-40 on your hands. That stuff gets into your system from absorption through your skin.

What a cool idea, i must try that on a remote iv got that don't work. Thanks for shearing...

I accidentally used carb cleaner to clean an electrical board and it destroyed it. Opps..

You also can use water with soap and brush the remote. Tested it some times and it works