Home » Video » ...

Car subs pulsing Videos

Pulsing LED's & Subs (3 10's)

Pulsing car underlights

LED light strip under my car which is powered directly from the sub or car battery on a 3 way switch.

User Comments

Anthony Shivago commented on 20 May 2014

Nice I like I'm looking to put some under my mustang I want some while ones same settings like that any suggestions?

LEDs pulsing to two 12" subs (Leds.)

User Comments

iMissclicked commented on 06 Oct 2012

Yea I recommend some brake wire. It's pretty thin and you can buy it in rolls of like 50 ft for $5 at oRileys or any other automotive store. I also recommend you put a switch on them too because it's real hard trying to drive with lights pulsing everywhere lol. You can buy a switch with a little red button on it and just cut the wire you got going from your subs to the LEDs and slip the switch in between it so it can cut the power going to the LEDs with a button.

iMissclicked commented on 30 Jun 2012

The wires that come from the led strip has pos and neg. Put the pos into the pos speaker terminal on the amp and the neg to the neg and just tighten the bolt. When power goes to the subs they go to the leds too.

MrrReflectorr commented on 06 Oct 2012

I have lights under my dash in the front too. Could I just get some extra wire and run them to my subs for them to flash too?

MrrReflectorr commented on 06 Oct 2012

Nice song and LED setup. I was wondering how to do that. Subbed man

Alex Wall commented on 30 Jun 2012

Did you just wire them to a speaker wire to get them to flash?

SDX Audio - 10" Subs w/ Blue Pulsating LEDs

My buddys SDX Audio Subs with an 800watt amp and Pulsating LEDs. 100$ at Pepboys for the subs. Sounds even better in person.

User Comments

bobby bobbs commented on 03 May 2013

There entry level subs if you want the absolute best subs you get PRV Audio best in the business hands down !!!

adrian Ortiz commented on 09 Nov 2012

hey i just wanted to ask if they are actually worth getting because am thinking of buying the same stuf

Dj_C0mpaRic0 commented on 22 Jul 2014

How are those lights connected. What are they connected to

Headshotfury commented on 18 Dec 2012

For 100$ theyre alright, id personally get something else

Led light bars pulsing with subs

I hooked up a couple 15" light bars to pulse with my subs.

D.I.Y - Install Pulsing LED Lights In Car

Now if you want them to pulse connect the positive to one of the speaker wires which will be grey purple white or green always keep the ground connected to the ...

User Comments

Dylan Lloyd commented on 05 Jun 2013

Mate you don't connect them up to the head unit! you need to run the wires through the car to the back where the amp is. then unclip your sub wires and twist the positive around one and then twist the negative around the other. now plug them back in and try it. the power going to the sub goes to the lights as well. therefor you get light at low sound and it is really bright at half power or max power. this is how they make it look good and bright.

Reckless5755 commented on 23 May 2014

I got some 8in LEDs for my trans am and connected them to my light switch so when ever I turn my lights on the LEDs turn on that way your not going into your stereo and messing with your wires.

IBROBD commented on 01 Feb 2014

Just out of curiosity why did you choose to use superbrightleds.com when there are soo many other inexpensive lights? I'm contemplating on where to buy my lights from.